jamesromeos
New Member
Finally getting back to my project. 1975 122mm CB 125s. I found a factory carb from the PO. He had installed a mikuni POS on it. my issue was the bike would not ever start on choke with the crap carb. It would run and Idle fine with the choke off, even on cold days. I got the factory keihin carb sent to me last week. on the right side there is a nearled nickel looking screw in the carb, and down to the left lower there is a brass screw that can be screwed in so far it is recessed. I cant get the bike to run other than a sputter at WOT. any detailed instructions on how to set the carb back to stock specs? pics would help/
Thanks in advance,
Jim
Thanks in advance,
Jim