CB200 Coil

alec.korver

Been Around the Block
Okay! So I have my motor put back together, and have almost everything done.... But can somebody draw me a labeled diagram of where the two coil wires that feed the coil go to... One I believe comes from the spark advance.... and the other one I do not know. This is causing me some frustration as I am getting now spark. Any help would be great!
 
one hot +, one to the c.b.points (battery ignition set up)..polarity makes a slight difference also in electron flow at plug...see if coil is marked or your connectors show how it was connected before.
joe@ vcycle
 
The black/white wire goes to the kill switch and the blue wire goes to the condenser on top of the engine (the condenser has another blue wire going to the points).
 
Back
Top Bottom