cb200 swing arm help

[deepwaterimports]

hey guys i have just had to oxy off a seized swing arm bolt, and am now in need of new bushes, dust covers, seals etc dose anyone know a good site to grab them from for my cb200?

i have this link but 170aus for all the items is a little steep or is it????

http://www.cmsnl.com/honda-cb200-general-export_model16412/partslist/F07.html#results


any help would be appriciated

 

[GK]

Go find an old model steam train club retired hobbyist kind of guy with a lathe (or a similar kind of sad old bastard in a barn ;D ) or go to a general machinist and get some bronze bushes machined up.Take the old junk bushes(sleeves,etc,),swingarm bolt,swingarm and they should be able to work it out from there.....BB's are far better than the Honda parts,honestly.Take a print out of the CMSNL parts picture and they will think you are really clever and they will make you a cup of coffee and tell you some boring old story,like twice!....(Wear discrete earplugs.....) Fit them packed full of grease and forget about them,like forever.....

I met one of those sad old bastards in a barn once, well an old shop but I didnt use the ear plugs coz i've got a bit of respect for those who have lived a life, turns out his story was worth listening to, he was Charlie May one of the greatest speedway racers Oz has produced he took me out to the back of his shop and it was full to the rafters with every type of motorcycle you can imagine.
he died a few years later and the auction was one of the biggest vintage bike auctions seen for many years, they're worth listening to those sad old bastards

 

[GK]

A bit of respect goes a long way brother

 

[deepwaterimports]

Thanks guys, will have do do a shout out to any of the aus guys that know anyone.

 

[GK]

Thanks guys, will have do do a shout out to any of the aus guys that know anyone.

Where are you mate?

 

[deepwaterimports]

Where are you mate?

I'm on the central coast just north of sydney. Have no idea of anyone around here that coul hel me though.

 

[deepwaterimports]

so i am up to the stage off putting the new bolt back in and was told there was only one way to get it back in, tap it in then twist slightly then tap it more anyone have a idea about this???? im confused as i tried to assemble without bushes and it got like 3/4 in then stopped??????? Help!

 

[deepwaterimports]

bumpdy bump