cb350 engine special tools?

[Goldberg2363]

I'm in the process of tearing down a cb350 engine and i am stuck. I have no idea where to get the tool to pull the generator rotor and the oil filter rotor. Any one have any idea where i can get those tools or other options for getting those parts off?

 

[DrJ]

Unless you need to replace the starter clutch, it is not necessary to remove the rotor for engine disassembly. But if it is necessary, you can use a gear puller from any auto shop.

http://www.amprotools.net/product_list.aspx?productid=804&partnerid=33&categoryid=5&mode=show

The oil filler tool is available from Motion Pro:

http://www.motionpro.com/motorcycle/partno/08-0015/

 

[Goldberg2363]

awesome thanks.

 

[sxecafe]

I just posted this on my thread but: That's almost identical to what I bought... How much pressure do you need in order to get that thing off because I felt like I was going to do some serious damage if I kept going?

 

[crazypj]

You can get the correct puller from any dealer who buys from K&L Supply company.
I'm pretty sure they do the peg spanner for oil filter as well

 

[djelliott]

Here you go.

http://www.bore-tech.com/CB.html


Scroll down and you'll find both tools.

 

[sxecafe]

Ill take a picture of mine when I get back in to town.

If you have to exert that much pressure to get it of, how do you put te thing back on?

 

[teazer]

Please avoid using a three leg puller. If you are lucky, the rotor will come off, but many times, it will damage the rotor. Proper pullers are cheap.

They just pop straight back onto the taper. The reason they need a puller is because the two parts of the taper, "ring" together and are very hard to break apart.

 

[sxecafe]

Damn, it's a three legger. Alright.

Thanks for the other info.