CB350 hand tools,angle grinder,and raddle cans

[fisherdude]

well here it goes, I picked up a gaggle of CB350F's (do you call 4 a gaggle or is that heard,a flock, or just 4 bikes) whatever.
Have 2 extra engs. lookin to part one out so i can finish this one.
here's the bike in shop ready to start.

she is 99% there.

Eng. prep.

Frame & Eng.
Have more to show and a lot more to learn.

Thanks again

 

[fisherdude]

motor painted with dupli-color low gloss black eng.paint

 

[biker_reject]

Sweet! Engine looks great.

 

[fisherdude]

here it is a little farther along
eng. installed waiting for more flow

also chopped the rear fender

took the front fender shorten it about 4" each end by splicing no welding

painted rims they're hanging not sure if i like how appliance paint is coming out well see

 

[fisherdude]

hubs painted along with spokes

7 day wait for rims is finally over front came out good but i guess i shot it to light.
i'll have to redo it and wait
going to clear coat them after tires are mounted

thanks for checking out my ride

 

[biker_reject]

How big is the bass in your avatar?

 

[JustinLonghorn]

I am a big fan of the "Do Something" on the wall by the door. Keep up the good work, sir.

 

[manualofman]

I'm really digging how you took advantage of those lines on your engine when doing the paint. It came out looking really good.

Good idea using foam to hold your spokes while painting, gonna use that one.

 

[fisherdude]

thanks
the bass its was 6.1 and went on to live another day
so far my eng. is my fav.
spoke trick wasn't that great still had to do one at a time as you can see them hanging in back round
that do something on the wall, i try live by it even if its something trivial like cleaning like what i'm gonna do now

i'm also gonna have questions on carb rebuild kits should i ask here or go to another forum

thanks again

 

[fisherdude]

it's been a while since my last post.
i have slowly tried to keep things going been dealing with my construction trade lately (fuckin bullshit people can give a rats ass about your time, sorry had to vent)
i got the wheels together

pardon the dust
also painted controls took them completely apart having issues with the orange lettering will post when done

painted M/C need to figure out which way i like the cap

working on other things like a seat shave, body work,and really try to pin point color choice thinking red & black but that changes almost daily

 

[MotorbikeBruno]

Not a bad start. Great project so far.

 

[fisherdude]

thank you