CB350f/CB450k/CB750/CB550 guys! New products at DCC for you!

tWistedWheelz

tWistedWheelz

BUILT NOT BOUGHT!
The ones on the link are for the CB350f and CB450k, but also available is the CB750 and CB550, and soon to come will be the CB350k and the CB360t models!
http://www.dimecitycycles.com/vintage-cafe-racer-bobber-brat-chopper-custom-motorcycle-electronic-parts-twisted-designz-cb350f-replacement-gauge-face-decals-td-350f.html

Check'em out and let me know what you guys think!

DCC has the CB350f and CB450K ones in stock now, CB750 and CB550 will be in stock soon, so inquire to them on the availability of those and the cb350k and CB360t model faces!

Thanks for looking guys!
 
Cool Brandon, Can you do them in KPH and MPH? And I think my 81 CM400 guages are the same as the CB750 from the 79. I will have to cross reference, cause after seeing yours on Caroline, I want to change mine out but I need KPH and would like MPH on them as well, so can you do a custom order when I am ready? I guess that is the point I am trying to make.
 
really like the rising sun ones and now I am thinking I could use those, if you can do KPH and then tie it in with a small risinf sun on the side of my seat hump.
 
Mike, I would love to be able to offer one offs, but just to be honest, the cost of one offs are just too high and I have so much time in making them too that it is not worth it in the end for me or a consumer! I was only able to offer this line through a distributor by setting minimum orders and sticking with a set of designs. I think the relationship with DCC will be a good way for me to offer the product to guys like us that love building these old machines on a budget. I only did this because DCC is a great outfit and has the ability to run the production numbers I needed to get the consumer price point down to a reasonable price. I think the price is very reasonable for the product and is a great way for garage builders to personalize their builds and maintain a real world budget. I hope the product does well and that tWisted Designz can expand its line!
 
PHeller said:
random question:


Do guys sell mini-gauges like those for use with Hawk indicator panel?
Click to expand...

That is a question for DCC, shoot them and email, you can find it in the contacts section of their site!
 
PRIMO BITCHIN' !!!

Adding kph might not be a bad idea for your next run though. ; )
 
Are these gauge faces still being made? I tried to order the pin-up ones from DCC and was told they no longer carry them... :(
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom