So it's almost complete now...decided to share, get opinions
This is project "twss/dilligaff"
1975 Honda CB 360
Bored to 69 mm gs pistons (378)
Mikuni 30's
Drag bars, h4 headlight bucket
Eliminated the blinkers, indicator lights, chopped the front fender (used a piece of that for the rear)
Welded on emgo trumpets and wrapped it all
Headlight wired into 3way switch, led tail/stop
Starter removed and blocked off, and all switches bypassed or otherwise reconfigured so I have pretty bare handlebars
Universal master cylinder for front with single hose (not on yet)
Waiting on a new battery and rectifier (overcharged and Fried a ballistic 4 cell)
All from a $600 basket case i got a month ago ( literally inventoried in boxes completely dismantled)
This is project "twss/dilligaff"
1975 Honda CB 360
Bored to 69 mm gs pistons (378)
Mikuni 30's
Drag bars, h4 headlight bucket
Eliminated the blinkers, indicator lights, chopped the front fender (used a piece of that for the rear)
Welded on emgo trumpets and wrapped it all
Headlight wired into 3way switch, led tail/stop
Starter removed and blocked off, and all switches bypassed or otherwise reconfigured so I have pretty bare handlebars
Universal master cylinder for front with single hose (not on yet)
Waiting on a new battery and rectifier (overcharged and Fried a ballistic 4 cell)
All from a $600 basket case i got a month ago ( literally inventoried in boxes completely dismantled)