CB360 Project: Lucky 7even! (still adding) SS brake lines June 17/11
- Thread starter cafePete
- Start date
Re: CB360 Project: Lucky 7even! ( Update May 2/10)
I think if I remember right, when the marks on the cam chain sprocket in the rocker box are lined up horizontal like they should be the (I think) "T" mark on the flywheel should be lined up with the notch on the stator. I'd double check the manual but, I'm pretty sure thats how it's sposed to be, I hope it is, cuz thats the way mine went together.
LOOKS FREAKIN' GOOD DUDE!!
Like everyone else says, the neutral light is brilliant! I'm lookin' to come up with somethin' nifty for mine also. It's the first good shot of the paint you laid on the fork clamps and and master cylinder, I just can't say enough about this thing man. GREAT WORK!
cafePete said:
I think if I remember right, when the marks on the cam chain sprocket in the rocker box are lined up horizontal like they should be the (I think) "T" mark on the flywheel should be lined up with the notch on the stator. I'd double check the manual but, I'm pretty sure thats how it's sposed to be, I hope it is, cuz thats the way mine went together.
LOOKS FREAKIN' GOOD DUDE!!
Like everyone else says, the neutral light is brilliant! I'm lookin' to come up with somethin' nifty for mine also. It's the first good shot of the paint you laid on the fork clamps and and master cylinder, I just can't say enough about this thing man. GREAT WORK!
JustinLonghorn
No Purple Hearts, No Blue Ribbons
Re: CB360 Project: Lucky 7even! ( Update May 2/10)
Pete,
This is one fine looking machine. We might have to get our 360's together sometime.
Pete,
This is one fine looking machine. We might have to get our 360's together sometime.
Re: CB360 Project: Lucky 7even! ( Update May 2/10)
Thanks man! I'm very happy with the way she turning out. Hows your paint turning out? next major step for me is painting the seat to match.
Thanks for the heads up. the pin was soaking at the time of photo, but thanks for the reminder.
I came across it when looking for spray max 2k clear, also could not find any in Ontario.
Really wanted the 2k clear and the shipping from the states was a little crazy( the only site that would ship paint to Canada) so I add a few can of the VHT epoxy.
Heres the site.
http://www.tcpglobal.com/spraypaintdepot/vht-epoxy-paint.aspx
Hope this helps.
JustinLonghorn said:
Thanks man! I'm very happy with the way she turning out. Hows your paint turning out? next major step for me is painting the seat to match.
rjz5400 said:
Thanks for the heads up. the pin was soaking at the time of photo, but thanks for the reminder.
Curbcast said:
I came across it when looking for spray max 2k clear, also could not find any in Ontario.
Really wanted the 2k clear and the shipping from the states was a little crazy( the only site that would ship paint to Canada) so I add a few can of the VHT epoxy.
Heres the site.
http://www.tcpglobal.com/spraypaintdepot/vht-epoxy-paint.aspx
Hope this helps.
Re: CB360 Project: Lucky 7even! ( 2-1 exhaust May 4/10)
So I came across this exhaust on ebay after typing in CB360 exhaust, won the exhaust then after looking at the details cb360/cb350. ???
The exhaust came in yestrday quickly did a test fit and it fits, not perfect but better then I thought it would
, I'll have to make a few small
mods, but it's on.
Heres a few pics
I'm sure it's going to get the black paint treatment, like this ;D
thanks for looking
So I came across this exhaust on ebay after typing in CB360 exhaust, won the exhaust then after looking at the details cb360/cb350. ???
The exhaust came in yestrday quickly did a test fit and it fits, not perfect but better then I thought it would
, I'll have to make a few smallmods, but it's on.
Heres a few pics
I'm sure it's going to get the black paint treatment, like this ;D
thanks for looking
Re: CB360 Project: Lucky 7even! (2-1 exhaust May 4/10)
Don't know about Canada but here most of those mini lights will pass any local inspections needed to get it on the road. They just aren't approved by DOT for feceral highway use. How often you going to be cruising on the interstate on your 360 anyway, right? And Curb your's is a 175 right? Again, maybe Canada is stricter?
Don't know about Canada but here most of those mini lights will pass any local inspections needed to get it on the road. They just aren't approved by DOT for feceral highway use. How often you going to be cruising on the interstate on your 360 anyway, right? And Curb your's is a 175 right? Again, maybe Canada is stricter?
Re: CB360 Project: Lucky 7even! (2-1 exhaust May 4/10)
Will do!
I believe when checking the tappets clearance, setting the left piston
to TDC the LT marking, the inlet and outlet valves should be closed.
If not the cam is off. That's what I understood from the
manual.
I'll let you know the outcome.
MrBerner said:
Will do!
I believe when checking the tappets clearance, setting the left piston
to TDC the LT marking, the inlet and outlet valves should be closed.
If not the cam is off. That's what I understood from the
manual.
I'll let you know the outcome.
Re: CB360 Project: Lucky 7even! (2-1 exhaust May 4/10)
Welcome to the forum!
I removed the old tires and wire wheeled, sanded and cleaned the rim. then installed the new rubber, be sure to test fill the new tire before
painting, I punchered the tube first time around. remove all the air, tape off the tire and squish the tire as you paint the edge of the rim.
Hope this helps.
meatball said:
Welcome to the forum!
I removed the old tires and wire wheeled, sanded and cleaned the rim. then installed the new rubber, be sure to test fill the new tire before
painting, I punchered the tube first time around. remove all the air, tape off the tire and squish the tire as you paint the edge of the rim.
Hope this helps.
