pkoster
Proud member of the blue CB360 club
I'm going to use this as my main thread/bike log for my 1974 CB360.
Brief background:
- Owned it for 1 year now. Bike looked clean and original when I got it (picture attached)
- Rode for 1 year without any major changes. Just oil changes and plugs.
Things I found so far to do:
- forks leaking
- missing/power loss at 3500-4500 RPM when cruising
- regulator not attached
- top triple cracked
- gauges wrapped in inner tube (literally)
- clutch may be slipping - neutral hard to find when hot
Near future:
- rear brakes (drum)
- front brakes (disk)
Things I have in mind:
- electronic ignition (Pamco or DIY)
- timing chain tensioner
- improve compression (rings/top end/??)
- OEM seat
- new tires
Brief background:
- Owned it for 1 year now. Bike looked clean and original when I got it (picture attached)
- Rode for 1 year without any major changes. Just oil changes and plugs.
Things I found so far to do:
- forks leaking
- missing/power loss at 3500-4500 RPM when cruising
- regulator not attached
- top triple cracked
- gauges wrapped in inner tube (literally)
- clutch may be slipping - neutral hard to find when hot
Near future:
- rear brakes (drum)
- front brakes (disk)
Things I have in mind:
- electronic ignition (Pamco or DIY)
- timing chain tensioner
- improve compression (rings/top end/??)
- OEM seat
- new tires