Evening gents
Been having some issues with my CB400F. Currently trying to tune for pods but its a total nightmare, iv tried all sorts of combinations from smaller jets to larger jets changing the float heights and even moving the needle, Lots of combinations iv tried but just cant find the sweet spot.
The bike runs really rich so as you can imagine i go through a shit ton of plugs. I finally made a little progress yesterday by moving the needle shim up to the 4th shim, putting a #42 pilot and a #82 main. got the bike started and running for around 2 mins but eventually it died out. iv benched synced the carbs and vacuum synced them and tried to adjust them whilst i had the bike running.
iv attached a picture of the plugs to show you the results... any advise would be greatly appreciated.
Been having some issues with my CB400F. Currently trying to tune for pods but its a total nightmare, iv tried all sorts of combinations from smaller jets to larger jets changing the float heights and even moving the needle, Lots of combinations iv tried but just cant find the sweet spot.
The bike runs really rich so as you can imagine i go through a shit ton of plugs. I finally made a little progress yesterday by moving the needle shim up to the 4th shim, putting a #42 pilot and a #82 main. got the bike started and running for around 2 mins but eventually it died out. iv benched synced the carbs and vacuum synced them and tried to adjust them whilst i had the bike running.
iv attached a picture of the plugs to show you the results... any advise would be greatly appreciated.