CB450 Stock headers, hangers, etc.

[kioskguy]

So my friend Tammy bought a CB450 last season, we did some work to it but she never got to ride it. It has a 2 into one exhaust which was never properly rejetted (pops and cracks) and so we found a set of stock 450 mufflers on CL. However, we found that the headers must not be Cb450's. They don't let the exhaust drop low enough.

Anyone have some CB450 headers? Or ideas?
What other header models might work?

Also, she needs the pipe hanger brackets if anyone has a set laying around.

 

[DrJ]

You go girl!

 

[lingo]

Is she wanting the whole exhaust or just the headers?

 

[kioskguy]

She has the exhaust which is marked CB450 but needs proper header pipes.

 

[lingo]

I missed that she had mufflers. i will take a pic of what I have tonight when I get home.

 

[kioskguy]

Thank you Lingo. Can you also measure on the header pipes, the distance from the center of the intake to the center of the outflow pipe?

I'm trying to gauge how far off the header pipes are that we have, seems like two inches or so.

 

[lingo]

They are a little rusty on the back side and dirty. Definitely usable. I can run them through the parts washer if you want

 

[kioskguy]

Thanks Lingo, I'm not sure what I'm looking at with the measuring tape in the photos. Is that about 14" on center from tube to tube?

 

[lingo]

sorry I forgot the descriptions. I had a couple of drinks yesterday. Yes about 14" ID to ID and 18 end to end. If she wants them, she can have them.

 

[kioskguy]

Man, the DTT community is full of excellent people. Builds my faith in man kind.

Okay, I'll go measure it for her and let you know. Thanks Lingo!

 

[kioskguy]

Lingo,
I think these will work. How can I get them from you? If you box them, I can have UPS or FedEx pick them up. I can schedule a pickup (perhaps from your work place?). I would just need the box dimensions, approx weight and the pickup address/phone.

Thanks again.

Tim