enterlance
Active Member
Hi, on my way putting up the CB750 I started last year, after installing the triple tree and fork legs, I found that the fork interval is not equal - they are not parallel. The top interval is as much as 1' wider than the bottom(5.8' vs 4.8').
Is this a problem? If so, how should I fix it before putting on the front wheel?
New problems updated below:
The tarozzi fork tubes arrived today. They absolutely made mounting process a lot easier.
However, after fitting the lower fork legs onto the front wheel, it seems that the fork is not sitting properly (as seen in the attachment), the other side seems fine.
The left fork only has little clearance against the brake disc, what could be the problem? Is my lower legs messed up?
Is this a problem? If so, how should I fix it before putting on the front wheel?
New problems updated below:
The tarozzi fork tubes arrived today. They absolutely made mounting process a lot easier.
However, after fitting the lower fork legs onto the front wheel, it seems that the fork is not sitting properly (as seen in the attachment), the other side seems fine.
The left fork only has little clearance against the brake disc, what could be the problem? Is my lower legs messed up?