RatBag22
Active Member
Hi guy's, Pretty New to the forum names Ollie. "ahem" I mean RatBag.
Got a Cg 124cc 1995-6, a while back about 7 months now. Been really working on it for the past couple of months with my dads help. He rebuilt a 1972 rocket 3. about 3 times (not sure if the name was to do with it : ) anyway just building it back to basics as my first bike, I was 17 about a month ago and just been lurking here for a while. looking at some sick bikes aswell. some of your guys work is just awesome hope mine comes out a quarter as good. and don't worry I'm not one of those little runts you see. so just hope to get some advice and some good old fashioned knowledge. Not that my dad dosn't have enough ;D
Unfortunetly I only just started taking the pictures about a month ago as I had a shitload of school coursework which gets in the way quite abit. I found myself quite lost for a while about a week or two back, life is some scary shit. I didn't know what I wanted to do, but I'm pretty settled that I want to spray cars, bikes etc. so i'm gonna see where that takes me.
So here's where i started (with the pics)
Tank all flattened first wet and dry then T-cut then watered down T-cut then rub off then clear lacquered
Sorry I don't know why the quality went down i used imageshack so that could be it. I'll try and create a photobucket later
I'm gonna put the rest up later. but I'll tell you what i have done so far. I've sprayed the tank. Done the frame, forks, swingarm, wiring loom, headlight, blinkers, speedo setup, handlebars, and done the front wheel.
thanks guys.
Got a Cg 124cc 1995-6, a while back about 7 months now. Been really working on it for the past couple of months with my dads help. He rebuilt a 1972 rocket 3. about 3 times (not sure if the name was to do with it : ) anyway just building it back to basics as my first bike, I was 17 about a month ago and just been lurking here for a while. looking at some sick bikes aswell. some of your guys work is just awesome hope mine comes out a quarter as good. and don't worry I'm not one of those little runts you see. so just hope to get some advice and some good old fashioned knowledge. Not that my dad dosn't have enough ;D
Unfortunetly I only just started taking the pictures about a month ago as I had a shitload of school coursework which gets in the way quite abit. I found myself quite lost for a while about a week or two back, life is some scary shit. I didn't know what I wanted to do, but I'm pretty settled that I want to spray cars, bikes etc. so i'm gonna see where that takes me.
So here's where i started (with the pics)
Tank all flattened first wet and dry then T-cut then watered down T-cut then rub off then clear lacquered
Sorry I don't know why the quality went down i used imageshack so that could be it. I'll try and create a photobucket later
I'm gonna put the rest up later. but I'll tell you what i have done so far. I've sprayed the tank. Done the frame, forks, swingarm, wiring loom, headlight, blinkers, speedo setup, handlebars, and done the front wheel.
thanks guys.