cbcafejunkie
Been Around the Block
Title says it all, just need everything but harness
Looks like I have it all then as it is stock kick only, well except the left bar control. Looking for a cheap solution to that. Also looking to run LED turn signals.JP74 said:that reg/rec unit will have you covered for charging. what else you needing? fuse box and electric starter solenoid? or also lights, controls on bars etc etc?
cant believe I just saw this post. Thanks for the info on the led flasher, that probably saved me on my 750 as well.JP74 said:i may have a control. prob not off a 360, but others work. ill let you know if i find anything.. as for running LED signals, a electronic flasher from any parts store works great., old standard type ones wont work right with leds..
Starter and left hand turn as long as it works I'm up for it. This is a ratbratt build and I'm going as cheap as possible thanks a ton for the help outfocusinprogress said:I've got a starter solenoid and a left hand bar control panel for the lights/signals/horn....uncut wiring to it as well
Thanks for your reply I need the rear brake spindle? The part that cams the shoes and connects to the cable pull leverswapdip said:I just took apart a CJ360T, send me a list of what you need and I'll find it and send you a picture
trek97 said:http://www.sparckmoto.com/Products
cbcafejunkie said:Starter and left hand turn as long as it works I'm up for it. This is a ratbratt build and I'm going as cheap as possible thanks a ton for the help out
JP74 said:i may have a control. prob not off a 360, but others work. ill let you know if i find anything.. as for running LED signals, a electronic flasher from any parts store works great., old standard type ones wont work right with leds..