CognitoMoto Rearset & Rear Master Cylinder Setup

rohalloran

Active Member
I have fitted a GSXR 750 rear master cylinder to my CognitoMoto CB750K rearsets but I am a bit stumped as to how/where to put the brake light switch. Anyone have a similar setup and like to share some pictures?
 

Maritime

Over 10,000 Posts
How about a banjo bolt with a switch, like this:
+1 this will work fine if you can fit it. I did one of these on the front brake conversion I did on my Sons CB125 that came with the scary mechanical disk, I got a complete master/line/caliper for a CR125 which worked perfect but has no light switch being a dirt bike. Added one of these and the light works perfect.
 

Maritime

Over 10,000 Posts
If younzoom in on the right bar handle you can see the switch mounted.
20210317_182416.jpg
 

DTT Bike Of The Month Gallery

DTT Light or Dark

www.jadusmotorcycleparts.com
shop.themotoworks.com
www.cognitomoto.com
https://www.townmoto.com
www.speedmotoco.com
www.lostapostle.ca/
www.sparckmoto.com
Top Bottom