Complete CB175 partout - cb200 engine part out - NEWER PRICING - Sep10

alec.korver

alec.korver

Been Around the Block
I have a CB175 I am looking to part out. Everything is there, its a sweet looking bike. However I will get more money for it in parts rather than whole.... The engine is from a cb200 with 6k miles on it. I just had the cylinders bored and honed to .25 over with new pistons and rings. New valves, the head has been ported and polished. The engine as a whole has just given me compression problems since the beginning. I suspect cam chain or other timing problems. If you want a part of the engine or the cb175 bike, let me know what you want and how much you will pay for it.


IMAG0038.jpg

IMAG0039.jpg


PRICED ITEMS BELOW - OBO

Tank - Great clean tank! - Sold
Front Fender - Sold
Front Wheelset - Sold
Titled Frame - Can sell just a certain part of the frame with title too.... $50.00
Headlight with bucket - Good condition, one big scrape on the outer chrome ring, but otherwise good. SOLD
CB 175 Headlight, No bucket, painted but metal in good condition $15.00
CB175 Carb set Complete $85.00
CB 200 Side kickstand $10.00
Seat - GREAT CONDITION $40.00
Front forks - Straight and true, need fork seals, $40.00
Cb 200 cylinder with pistons and rings just bored and honed - $80.00 (it cost $100.00 just to have it bored and honed, not including new pistons and rings)
Cb200 cylinder head(everything above the pistons) new valves, polished, lapped. $85.00 comes with cam shaft and rocker arms.
CB 175 Handel Bars $15.00
Rear Fender with brake light - 35
ANY OTHER PARTS OFFER


Feel free to tell me what you want and make an offer. Email me at hal0m0d@hotmail.com for the quickest reply. I do take paypal. I will sell the whole bike and engine for $600.00
 
Re: Complete CB175 partout - cb200 engine part out

Alex, who did the bore and hone and the port and polish and how much do you want for the complete 200 motor and carbs and pipes?
 
Re: Complete CB175 partout - cb200 engine part out

The bore and hone was done by arnold motor supply in their machine shop. Same with the port and polish. They really did good work. I would take $350 for the entire engine with carbs and pipes.
 
Re: Complete CB175 partout - cb200 engine part out

Looks like a good place to get parts machined. We have a local shop that's really good here in the northern burbs of Chicago
 
Re: Complete CB175 partout - cb200 engine part out

And I have over $350.00 into the engine on new parts alone.
 
Re: Complete CB175 partout - cb200 engine part out

I'm only 10 hours from chicago... Woohoo. However if you want to buy the engine, I have a cousin who lives in madison, he can either ship it to you when he drives back up, or you can pick it up from him. If your still interested.
 
Re: Complete CB175 partout - cb200 engine part out

Price estimate on gauges and/or tank?
 
Re: Complete CB175 partout - cb200 engine part out

Make offer for gauges, I would like $135.00 shipped for the tank.
 
Re: Complete CB175 partout - cb200 engine part out

I don't need another CB200 motor thanks, but there are guys here that I know that need to think about buying your fully rebuilt motor rather than spending huge amounts on their own motors or trying to run a junker.
 
Re: Complete CB175 partout - cb200 engine part out

Hey no worries.


Still have plenty of parts! feel free to offer up for what you want!
 
Re: Complete CB175 partout - cb200 engine part out

How much for the front fender? Any dents or dings (major)? Shipping to 48085?
 
Re: Complete CB175 partout - cb200 engine part out

nope, nothing major, still great looking. Looking to get around $35.00 shipped for it.
 
Re: Complete CB175 partout - cb200 engine part out

how much for the front wheel complete setup? actually the entire front brake system, levers, cables etc...
 
Re: Complete CB175 partout - cb200 engine part out

For the entire front wheel set up including levers and cables, I would like to get $60.00 shipped. The brake cable is new, the front wheel is in great shape. The levers are also in really good shape.
 
Re: Re: Complete CB175 partout - cb200 engine part out

alec.korver said:
For the entire front wheel set up including levers and cables, I would like to get $60.00 shipped. The brake cable is new, the front wheel is in great shape. The levers are also in really good shape.
Click to expand...

I'm interested in this if he doesn't grab it. will this include the axle, brake stay, and spacers?

I'm planning on converting my cb200 front brakes. let me know - paypal ready
 
Re: Complete CB175 partout - cb200 engine part out - PRICES UPDATED

alec.korver said:
nope, nothing major, still great looking. Looking to get around $35.00 shipped for it.
Click to expand...

Thanks, but I decided to go a different route on the front fender. GLWS.
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom