chickenStripCharlie
Coast to Coast
hi guys,
Can someone confirm the PCD of a dual disc comstar wheel. I believe it came off of a 1982 CB750C.
I have measured stud-to-stud of 46.15mm. For a 5 bolt pattern this gives a PCD of 78.5mm
However a more realistic 78mm would give me stud-to-stud of 45.85. So i need to know if the PCD is 78.5 or if i was off by 0.3mm in my measurement somewhere
Thanks!
EDIT: This is a REVERSE comstar, 19" wheel.
Looks exactly like this one:
Can someone confirm the PCD of a dual disc comstar wheel. I believe it came off of a 1982 CB750C.
I have measured stud-to-stud of 46.15mm. For a 5 bolt pattern this gives a PCD of 78.5mm
However a more realistic 78mm would give me stud-to-stud of 45.85. So i need to know if the PCD is 78.5 or if i was off by 0.3mm in my measurement somewhere
Thanks!
EDIT: This is a REVERSE comstar, 19" wheel.
Looks exactly like this one:
Last edited: