De tabbing/trimming frame question

JunkKing

New Member
Hey guys, building my first cafe and im now de tabbing and trimming my frame down. I want to get rid of these rear sections hanging off, they are originally to hold the exhaust and a stop for the center stand but they are no longer needed. Problem is one of the sides has one of the two threaded holes that hold on my footpeg, I could cut it right after the threaded hole but that wouldnt look very good and im not sure how strong it would be either. Im guessing I may have to go with a different way of mounting the peg up but im not sure how, any ideas?
xEDv0Hk.jpg
 
Could you cut out the top bar of the triangle smooth out then re weld following the angle of the tube top left make the bar a lot shorter



Sent from my iPhone using DO THE TON
 
Follow the tube that comes from above behind the swingarm gusset so it will flow.
 

Attachments

  • xEDv0Hk_LI (2).jpg
    xEDv0Hk_LI (2).jpg
    430.9 KB · Views: 472
LOCKARD138 said:
Follow the tube that comes from above behind the swingarm gusset so it will flow.

Thats perfect, ill have my buddy who does welding take a look at it
Thanks, ill post pics once its done
 
Back
Top Bottom