joeyputt
The green flag sets me free
Re: DWMS Racing RD350 Cafe Racer! The Engine Is Running, Link To Video!
This bike had very low miles brother rzresurection so the clutch basket was in excellent condition and did not need any work.
I have been working on a lot of the small details to finish the bike like bending the kick starter to clear the rear sets, building a new battery hold down, etc. and I spent the last week working on installing the switches in the handle bar controls, rebuilding the wiring harness, wiring the headlight, tail light, and turn signals, etc. We had to add a load equalizer to get the LED turn signal conversion to work so I mounted it to the front of the aluminum rock guards that I built for the frame and installed them in the rear of the frame. The front turn signals are in the ring on each side of the headlight and I mounted the rear turn signals on the inside of each top shock mount to keep the bike really clean looking!
I finished the wiring last night so we rolled the RD350 off the lift and outside to start her for the first time ever today and she started on the second kick!
Here is a link to a video of her running on my facebook page! https://www.facebook.com/joe.dwmsracing My page there is open so everyone should be able to see it however a lot of us are already friends there and if we are not send me a friend request!
This bike had very low miles brother rzresurection so the clutch basket was in excellent condition and did not need any work.
I have been working on a lot of the small details to finish the bike like bending the kick starter to clear the rear sets, building a new battery hold down, etc. and I spent the last week working on installing the switches in the handle bar controls, rebuilding the wiring harness, wiring the headlight, tail light, and turn signals, etc. We had to add a load equalizer to get the LED turn signal conversion to work so I mounted it to the front of the aluminum rock guards that I built for the frame and installed them in the rear of the frame. The front turn signals are in the ring on each side of the headlight and I mounted the rear turn signals on the inside of each top shock mount to keep the bike really clean looking!
I finished the wiring last night so we rolled the RD350 off the lift and outside to start her for the first time ever today and she started on the second kick!
Here is a link to a video of her running on my facebook page! https://www.facebook.com/joe.dwmsracing My page there is open so everyone should be able to see it however a lot of us are already friends there and if we are not send me a friend request!