bluesilver
New Member
Hi, sorry for yet another Carburetor question,
I have a Honda CJ360T and i was looking at setting the floats using the clear tube method as i am having a few issues trying to do it by sitting the carb at an angle and setting it that way.
So with the clear tube method, where should i be looking at getting the fuel height to line up with?
So i be looking to get the fuel height at the height of the gasket on the float bowl or is there a measurement that i should be aiming for above or below the gasket on the float bowl?
I find i can work with this method a lot easier.
I hope that question makes sense.
Any information would be greatly appreciated.
Cheers.
I have a Honda CJ360T and i was looking at setting the floats using the clear tube method as i am having a few issues trying to do it by sitting the carb at an angle and setting it that way.
So with the clear tube method, where should i be looking at getting the fuel height to line up with?
So i be looking to get the fuel height at the height of the gasket on the float bowl or is there a measurement that i should be aiming for above or below the gasket on the float bowl?
I find i can work with this method a lot easier.
I hope that question makes sense.
Any information would be greatly appreciated.
Cheers.