Thanks for the feed back guys.
I’m finding it really difficult to tie into the angle of the tank as it keeps changing the whole way along there is no clear angle if you know what I mean.
In between sanding on the seat I thought I’d have a look at this front fairing
Got myself some clear Perspex with the idea that when I’m painting it I can mask of where I want the small windscreen and it will all just be one continuous piece
So this is the rough shape
Then out with the heat gun
And the only thing I could find for a rough curve an old keg that I had tried to turn into a small spit.
She’s a bit rough but it was just a test run I wasn’t sure how easily it would shape but with the heat gun and the right mold I believe it would work a treat.
I have small round led lights about 47 mm diameter 3 of them I’m not sure how I will run them offset to one side, verdicts still out,
I may even abort the small LeD opting for a larger light, I kind of like the idea of the front fairing looking like a racing number for the original racing versions
Sent from my iPhone using
DO THE TON