Gauges - Speedo and Tach combined

[fluke12]

I'm looking to dump my standard CL350 gauges for a single, hopefully, small gauge. I don't have a problem with digital and/or analog combos. I know Acewell makes a few, but I'm looking to see what people have used, how they like them, etc. I'd love to see some installed too. Price IS an object so I'm hoping to not break the bank on gauges.

All help and suggestions are appreciated.

 

[SONICJK]

https://www.dan-moto.com/DM_US/speedos-and-gauges-wholesale-27.html?zenid=8b5faff76c48cb9dfa76d3cf1aae1b08

 

[Rick cb650 sc]

LCD Digital Moto contagiri - Kingwo tachimetro contachilometri della motocicletta del motociclo 12000rpm https://www.amazon.it/dp/B01MCY2L3P/ref=cm_sw_r_cp_apap_diFUSQ72ENWnN

Bought but not already installed. It seems to have everything i need
Tach, speedo, gears, gas level and so on

Sent from my GT-I9505 using DO THE TON mobile app

 

[runmikeyrun]

I'm gonna sub this. I'm interested for my cl350 build as well. Seems like the options for an all-in-one with gps speedometer is always in the $500-600 range. Would love to find a cheaper option. Even $350 would be ok. I don't wanna deal with wires and sensors on the front wheel.

Also, there's models available for cars that are cheaper however none are waterproof. If anyone knows a process to waterproof them I'm all ears. I suppose I could have a close fitting case 3D printed and then seal a piece of lexan over the speedo lens?


Here's where I list all my bikes:
'71 Kaw 250 Bison
'81 KZ750 cafe
'94 XR250L
2014 Yamaha Bolt

In progress: '68 CL350

 

[fluke12]

Also, there's models available for cars that are cheaper however none are waterproof. If anyone knows a process to waterproof them I'm all ears. I suppose I could have a close fitting case 3D printed and then seal a piece of lexan over the speedo lens?

Right, I came across this, https://intellitronix.com/products/digital-gauges/individual-gauges/led-bargraph-tach-speedo-combo, but wrong type of vehicle :/