gold mine

[Kev Nemo]

Find out how much he wants for this tail section, please-thanks!

 

[VonYinzer]

Near Pittsburgh PA. Its about a 9hr drive from my estimations. A bit longer than I can swing right now... I would love to get all the finned covers off of her though!

 

[my94f2]

Near Pittsburgh PA. Its about a 9hr drive from my estimations. A bit longer than I can swing right now... I would love to get all the finned covers off of her though!

i know he has another motor with em. they have been covered. is there 4 of them covers? hell for a lil more ill polish em out

KEVNEMO- will do

JRK- ill see if he will let go of any more

ok guys im goin tomorrow. i have a list here

boom- red seat cowl off the red 2 stroke
deviant- blue zuki tank
ride solo-cb450 tank
tim- xs650 hubs(i do know he'll give ya the whole rim)
curb- cl175 scrambler exhaust, cl160 tank
von- cl350 exhaust, finned covers
kant- cl exhaust from green bike, wheel in pic 46
twisted- cb750 seat pan
kev- primed tail

am i missin anything? i will go pull parts,get prices w/ shipping, and pm each of ya with cost

 

[Swagger]

Don't forget me:
Swagger - CL450 pipes

they don't need to be perfect, I'll be blasting them and ceramic coating. Don't need mufflers either.....

Thanks for doing this brutha!

 

[rjz5400]

i need the hanger off of a set of keihin pe 87 carbs, they are the carbs that go on a 1976 cb550. it is the crazy arm that holds on to the two throttle cables. it has two bolt holes in the bottom of it and then arcs around to position the cable ends above the butterfly. i am in 28401. if there is a complete set of carbs in there though and doesnt cost to much more i would take them just to have spares and polish some parts.

 

[VonYinzer]

Let me know! Ill take any finned engine cover off of any bike. I really want those honda ones though. Thanks man.

 

[my94f2]

might sound retarded but whats the diff between cl and cb tanks and exhausts?

 

[VonYinzer]

might sound retarded but whats the diff between cl and cb tanks and exhausts?

The tanks on different models have a different shape. The exhausts on a cl are "high pipes".

CL tank/pipes

CB tank/pipes

 

[VonYinzer]

The CL is a street and trail version of the CB. The high pipes, higher bars, seat, and other differences are to allow for mild off road style riding. There not dirtbikes, but well suited to clear trails and backroads with the proper tire.

 

[boomshakalaka]

I saw a lot of people asking for CL pipes but not sure if anyone asked for cl350 pipes. If not, Ill take any that you can find that arent in horrible condition.

 

[miketherider]

I really could use a Honda CB750 (SOHC) points cover. If it has some flash rust, that's fine; just need something without disgusting dents or scratches. If there are any finned covers (clutch/points/whatever) I'd like to jump in on those as well.

thanks!

 

[Flugtechnik]

I might be interested in this tank if it is in good condition. Although, I think Disliked may have already expressed interest. I will be stripping it to bare metal so I don't care about the paint.

 

[martyman]

That place is really a Goldmine, forget Willy Wonka that place is better than Chocolate.

 

[Curbcast]

Yup, Im still up for the cl175 pipes. Look the same as in photo.. for a 175. Anyone help me out with details on how they are different so he can sort it out for me? Thanks
CL tank/pipes