GSXR frontend swap on cb360


New Member
I've gone through some several posts on the this frontend swap and here is what I understand:

o CB360 Frame Conversion Stem from cognito motor
o 2006 GSXR 600 frontend, including the triple trees
o 2006 GSXR brake calipers and MC
o HD Narrow glide front wheel hub

o Is it possible to use the 360 hub on GSXR forks?
o Would a Nissin brake calipers a direct swap on GSXR fork mounts?
o Is it possible to match up the rotors from cbr 600rr on 360 hub?
o Is this the correct HD Narrow glide hub, if I went with HD hub?


New Member
Thank you for putting me to the correct hub. Do you know the party number to search for new ones or a key word for me to search the hub?


Over 1,000 Posts
Search "Harley narrowglide hub". If you intend to use dual discs you need a dual "flange" model as HD made them for both single and dual disc brake applications. Nearly all the HD aftermarket have them such as J&P, VTwin, etc. You can find plenty of used hubs at swap meets and internet forums at reasonable prices. EBay hubs seem to be made of gold! Most of the hubs you will find are for 3/4" axles. Later hubs are 25mm. Bearings can be swapped between the two versions.


New Member
The more I read, more I'm leaning towards going with Cognito Moto hub.. It's quick and easy, but expensive.
Last edited:


New Member
Ordered a set of 2008 gixer 600 caliper-MC from eBay and these are in good condition. Cleaned it up with degreaser and looks clean now.

I'm going to order EBC HH pads and galfer braided brake lines. Does anyone has any other suggestions?

DTT Bike Of The Month Gallery

DTT Light or Dark
Top Bottom