Hand controls with no electronics?

[Julian@MotoCARR]

I'm looking to clean up the bars and was wondering if anyone has seen 7/8" hand controls that don't have electronics, or maybe just one button?

 

[DaveMinella]

Dime City Cycles has a bunch of bar-mounted buttons in many configurations.

 

[foundation982]

I used a honda off road button and in my opinion only button you need is a horn just turn the key off to kill the engine

 

[Julian@MotoCARR]

You guys are thinking exactly what I am. I was planning on using an auto style key(off-ign-start), a MX tethered or a tilt triggered kill switch, and a horn button. I have found the ignition, a horn button, and kill switches but am having a hard time trying to find throttle controls that have no electronics.

 

[foundation982]

my bars right button is now taken off because I did a starter delete

Cl350 controls by foundation982, on Flickr

 

[Julian@MotoCARR]

my bars right button is now taken off because I did a starter delete

Cl350 controls by foundation982, on Flickr

foundation982, care to share what clutch/throttle controls you're using? . That's the exact look I want lol.

 

[Tim]

A 'throttle control with no electronics' is a throttle.

Motion Pro, Tomaselli, AMAL, EMGO... there are dozens / hundreds of throttles out there that have no electronics integrated.

You run a throttle, a brake lever perch, a clutch lever perch and somewhere throw on a kill switch.

 

[Nitsuj]

I'm looking to clean up the bars and was wondering if anyone has seen 7/8" hand controls that don't have electronics, or maybe just one button?

Just about any motocross bike. Or, any catalog dealing with chopper type parts.

 

[casper3043]

i'll be working on my handlebars soon and will be deleting everything i can. clip-on's are on back order, but i plan on moving the headlight on/off switch to a toggle on top of the headlight. remove the electric start (kick only), maybe the horn, killswitch, turn signals already removed and just have the brake light wired to the MC, throttle cables and clutch cables...that's all.

others should post up their clean setups! any minimalists out there?

 

[foundation982]

foundation982, care to share what clutch/throttle controls you're using? . That's the exact look I want lol.

I'm not 100% sure what they are I went to my local honda dealer and bought the throttle off the wall, and ordered the brake and clutch levers out of a magazine the guy had there, note that it was only so easy because my front brake is drum

 

[Tim]

I'm running a Yamaha YHA205 control pod on the left. Has turn signals, horn, hi-lo beam and kill switch all in one small pod.

Nothing on the right - just a Tommaselli Super Practic B throttle. Dedicated clutch and brake levers separate from throttle or switch pod.