Handlebar Source?

[IL8APEX]

New to the boards here, and looking to tap into your collective knowledge...

I've got a small Dirtbike based modern Cafe Racer project going on right now. My choice of handlebar, however, is probably going to be much more like what you'd typically see on a street fighter, so I wanted your input over here.

What I want is a 7/8" bar in black or silver (no chrome) with a very small rise, maybe 1/2" or 1", very little pullback and a narrow center section near the clamps. Steet tracker bars are typically very wide in the middle, I want something very narrow in the middle that looks more like a mountain bike handlebar:

The top clamp is from a CR125 and holds the bars approx. 100mm apart. Anyone know of any killer 7/8 bars that fit the bill? Where should I start looking?

Thanks in advance!

-Tom

 

[IL8APEX]

These are close:http://www.motovationusa.com/mvstore/scripts/prodView.asp?idProduct=563

A bit tall in the rise, though.

-Tom

 

[IL8APEX]

Gettting closer: Hagen Handlebars from StreetFighters, Inc.

-Tom

 

[hurley209]

maybe you can try making some from another set. cut, weld and re-finish a little bit to make them shiny lol..
thats if you cant find them to buy though.

 

[thompsonmx100]

I think you may be after unobtanium there. You said that last set is close but it is as close to what you described as I think you will get. Now remember you can trim bars down that are too wide.

 

[sebatron]

for the price of a set of name brand clip ons, you'd probably find a cheap pipe bender and enough 7/8" bar to work out something you'd be happy with.