Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
I am doing a build that is about 75% done. I did a build thread over on a harley forum and custom fighters. Figured I would post a micro-thread with a couple pics over here.
Start
tear down
Almost done, gsxr 1000 front end, CBR600RR rear end, paint, bobber, bunch of detail work to do. Major sticking point right now is the primary offset and chain run. I am gonna have to have someone who knows primarys and offset kits look at it. When I get that squared away I will be on the road. Also still have to build the lower shackle for the shock linkage.
Its definately a bobber, just chucked it in here because this is where I usually post. And I guess it is "fighter styled", anyway, just figured I would share some pics. ;D
Had a custom pivot bolt made, had bushings made for the swinger and stuck the bolt through the hole!!! Pretty straight forward.
I dont have to build a top shock mount because the CBR swinger incorporates the shock mount into the arm itself. All I have to do is build a lower shackle for the shock linkage. I have not done that yet. I just used a big hose clamp to conect the linkage to the frame to snap some pics. The lower shackle is gonna be real easy. I am just holding off until get the offset primary drive all squared away. I may have to ajust the arm more to one side or the other, so I dont want to make anything permanent until that is done. The wheel is pretty dead center inb the frame right now though, so I am in the ball park, may just need a little tweakin.
Rear tire is a 140. Just threw it together to take a couple rips. Ordering offset parts this week. Probably wont be together in time to take a spin this year.
Hey Bronze, I will move it to another fourm if ya want. Just doin a couple update pics, not a full build thread. Sorta "fightered" with the gixxer frontend and CBR rear. Anyway, no worries if ya want it moved. 8)
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
