so last winter i bored out the motor did a 95', Welded & trued crank, lefty bearing, Heads by WFOLarry, andrews 37 cams, Andrew's 30T power pulley, barnett clutch spring, tapered pushrods, flat top pistons, lockhart oil cooler, and installed a steering damper leaving me at 94HP and 98TQ
this winter i am going to change things up again. got a bit of a list but should be able to plow though it... here is some pics
last spring i took 2 fenders that where stock ST bob fenders and cut them up... I have a buddy thats dad is a master welder out in missouri... so he took it back home wiht him and the cuts... few weeks later, i get my new rear fender and could nto be happier.. well have a master welder do this instead of just weld and grind... well we are not going to use any body work, all metal, and powder my whole rear fender to show that you can ahve show qualtiy powder work on a bike... doing black cherry again but wiht a bit more gold and red flake in it... so yes the tank is coming off too
from here i was going to send the fender out to a buddy that owns KansasHellRide for some airbrush work... but that is a bit of ways away
here are some pics
made some small spacers for the risers to give me the clearance i needed
what the extra six looks like from the back
with the plate and tail taped on
you can see the change over stock
the bars:
sent that off to Hogrida... a few days later i get this from him
followed shortly after by this
then yesterday on the shop door step
so from here we at the powder pro did our thing!!!
then the final product
this winter i am going to change things up again. got a bit of a list but should be able to plow though it... here is some pics
last spring i took 2 fenders that where stock ST bob fenders and cut them up... I have a buddy thats dad is a master welder out in missouri... so he took it back home wiht him and the cuts... few weeks later, i get my new rear fender and could nto be happier.. well have a master welder do this instead of just weld and grind... well we are not going to use any body work, all metal, and powder my whole rear fender to show that you can ahve show qualtiy powder work on a bike... doing black cherry again but wiht a bit more gold and red flake in it... so yes the tank is coming off too
from here i was going to send the fender out to a buddy that owns KansasHellRide for some airbrush work... but that is a bit of ways away
here are some pics
made some small spacers for the risers to give me the clearance i needed
what the extra six looks like from the back
with the plate and tail taped on
you can see the change over stock
the bars:
sent that off to Hogrida... a few days later i get this from him
followed shortly after by this
then yesterday on the shop door step
so from here we at the powder pro did our thing!!!
then the final product