Harness help please
- Thread starter bigring
- Start date
carnivorous chicken
Over 1,000 Posts
It would be helpful to know which bike you're talking about, but the quick and easy answer is that you likely can make it work. Changes in wiring harnesses over time can be connectors, different rectifier/regulator set ups, etc. The question is how much of a pain it would be, and would it be worth it.
bigring
Active Member
Yeeee-ouch! :-\
I deserved the flaming . . . I'm not only a dummy, but also a noob.
Sorry, I thought I included it - was in a rush and copied (part of) an original post.
CB750
Frame is a '73, motor is a '76. Harness ordered was for a '73-'75 (interchangeable between years).
How different would it be? Looking at the switches, etc and it seems like they used the same ones on the '76.
Again, thanks for reading and help.
Cheers.
I deserved the flaming . . . I'm not only a dummy, but also a noob.
Sorry, I thought I included it - was in a rush and copied (part of) an original post.
CB750
Frame is a '73, motor is a '76. Harness ordered was for a '73-'75 (interchangeable between years).
How different would it be? Looking at the switches, etc and it seems like they used the same ones on the '76.
Again, thanks for reading and help.
Cheers.
carnivorous chicken
Over 1,000 Posts
That wasn't flaming, that was gentle ribbing.
I know from experience that the earlier Cb750 wiring harnesses (69-71? 72?) are slightly different than the later ones, but it's mostly in terms of style of the connectors. I think you'll find you can work with it, but I will let someone who's had later model CB750s chime in if they have a better idea as to the differences.
I know from experience that the earlier Cb750 wiring harnesses (69-71? 72?) are slightly different than the later ones, but it's mostly in terms of style of the connectors. I think you'll find you can work with it, but I will let someone who's had later model CB750s chime in if they have a better idea as to the differences.
