Help, CB360 wont start!!!!

sinjinle

Been Around the Block
hi gang,
I have a 75 Honda cb360 that was running fine last week. Yesterday i installed a new speedometer and was messing with the wiring. Today, i tried to start it...no go. its doesnt even make any sound. Light is on... the bike is on neutral, However, the neutral light didnt come on. (I can roll the bike back and forth without holding the clutch). any help would be greatly appreciated.
sinjin.
 
Maybe you accidentally unplugged the neutral switch wires
only suggestion is to go back and check all wiring connections and try try again.
Good Luck and keep us posted
 
Check to make sure the black and black/white wires to the kill switch are both properly plugged in. If so, trace the black/white wire to the coils and make sure those are also connected.
 
Sonreir said:
Check to make sure the black and black/white wires to the kill switch are both properly plugged in. If so, trace the black/white wire to the coils and make sure those are also connected.
second that, that was the colporate in my case.
 
Back
Top Bottom