erock85
Been Around the Block
I am installing LED flashers in '74 CB360 and purchased an electronic relay:
Maybe it's the relay I purchased but I do not get even close to 11-12 volts from the L Gray wire when all 4 flashers are hooked up and they flash incredibly slow
<img src="http://cdn.makeagif.com/media/6-14-2014/bkqspa.gif" alt="bkqspa on Make A Gif, Animated Gifs">
So when I hook an incandescent bulb, the original flasher bulb, into the circuit I get a normal flash and the relay clicks as it should and am getting 11+v from L Gray wire
<img src="http://cdn.makeagif.com/media/6-14-2014/o0fWP2.gif" alt="o0fWP2 on Make A Gif, Animated Gifs">
I feel like it is not getting enough load from the LEDs, but I don't know, maybe the relay is too heavy duty for this application. It was the only one O'reilly had. Any help is appreciated.
Maybe it's the relay I purchased but I do not get even close to 11-12 volts from the L Gray wire when all 4 flashers are hooked up and they flash incredibly slow
<img src="http://cdn.makeagif.com/media/6-14-2014/bkqspa.gif" alt="bkqspa on Make A Gif, Animated Gifs">
So when I hook an incandescent bulb, the original flasher bulb, into the circuit I get a normal flash and the relay clicks as it should and am getting 11+v from L Gray wire
<img src="http://cdn.makeagif.com/media/6-14-2014/o0fWP2.gif" alt="o0fWP2 on Make A Gif, Animated Gifs">
I feel like it is not getting enough load from the LEDs, but I don't know, maybe the relay is too heavy duty for this application. It was the only one O'reilly had. Any help is appreciated.