Honda CB360 NOS 3mm oversize piston/ring/cylinder set

360 Cafe Guy

New Member
Hey guys, I decided to put the stock pistons and rings into my 360 project, so up for sale here is a NOS 3mm oversize piston/ring set complete with wrist pins and clips. Included also is a cylinder jug which has been bored and honed to fit the pistons. It was professionally done, and I even had it bead blasted, so it looks BRAND NEW. I have roughly $200 into this setup...so I'm gonna ask $100+ shipping OBO. This would form the basis for one awesome engine! It just needs a home. I will post pics tomorrow.

Thanks,

Matt
 
Here are pictures of the set...
 

Attachments

  • P1010456.JPG
    P1010456.JPG
    28.3 KB · Views: 210
  • P1010459.JPG
    P1010459.JPG
    27.8 KB · Views: 263
  • P1010460.JPG
    P1010460.JPG
    28.9 KB · Views: 225
probably better that way, my relationship with the 360 is an unhealthy one... I should just put the money into my 750
 
Thats ok. Where did you find the +3mm pistons? All I can find avalible is +.75mm and that was threw my local dealer. Any help would be greatley appreciated.
 
There was a set of 69mm Suzuki pistons that are essentially a straight swap for the Honda 360 set (after boring your cylinders, of course). Finding some of those that are +1mm over would get you the same as +3mm on the Honda. I can't remember the exact model though. pj had mentioned them before in this thread, I think. You could look there.
 
I wish I could tell you more! The set I sold was really old (prob same vintage as the bike!). The boxes were falling apart, but they were white in color and had a small red dirt bike as part of the logo...brand??? In small, stamped blue letters it said CB 360 and on another side was the +3mm again in the small blue stamped letters. I don't even remember there being a brand name. I bought the set from a guy on EBay, and it included everything...rings, wrist pins, clips, etc. Was a really good deal too. Keep an eye on EBay, as I think I've stumbled on 1 set like it since. Good luck. If I think of more, I'll post it.

Matt
 
Back
Top Bottom