fluke12
Been Around the Block
I know the specific answer, it affects it differently, depending on ALL the variables, but I was looking for more general, larger cylinders = higher compression, or something like that.
My situation, 1972 CL350, went 1mm over due to burned pistons and new exhaust valves. My compression went from like 150psi on one side (and something really low on the other) to 120psi on each.
I know not all things are equal, like the pistons can have different domes, but i'm just trying to make sure everything is fine and i don't have a leak somewhere.
Thanks for any info!
My situation, 1972 CL350, went 1mm over due to burned pistons and new exhaust valves. My compression went from like 150psi on one side (and something really low on the other) to 120psi on each.
I know not all things are equal, like the pistons can have different domes, but i'm just trying to make sure everything is fine and i don't have a leak somewhere.
Thanks for any info!