Is this the place to ask about:

[Floegstad]

Guessing there allready exists a topic with what i am stuck in finding out.
I am in the middle of converting my 78 gs with some 95 gsxr usd forks,and i am desperately needing to either get one big disc that will fit my stock 400 wheel, or find a replacement wheel (18" with spokes) that does.
Really dont want to go dual disc.
Have to be the easyest swap with minor mods.(anyone need the stock frontend??)
Thanx in advance.
Cheers Jorgen

 

[Big R]

Have you checked out the GSResources yet? A member there by the screen name Salty Monk makes a conversion kit. With the kit, you use a stock front wheel, CBR rotors, a Kawasaki caliper, and stock forks. The thing that would be interesting to you is mounting the rotors to the stock wheel - Suzuki GS wheels have the 6 bolt pattern for the rotor, and the CBR rotors just need drilled slightly (and spaced out from the hub) to fit the GS wheels.

For reference: the CBR rotors used above have an overall diameter of 296 mm. Rotor dimensions can be found at.......I think it's www.metalgear.aus ?

 

[Floegstad]

Thanx a lot Rich!
Try to figure it out during the next days.
I migt have a cbr rotor from a 90-94 mod.
First thing in the morning i`ll check that out!