Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
well this is one idea i have , i thing is going to be ok . the part in blue tape need to be cut and weld back together . i am going to use the originals bearings the diameter is the same .
See what the diameter difference is in the original axle. You may be able to do a wheel bearing swap. Could be tricky though, as some mfgs. used proprietary bearings. Then, you will no doubt have to fabricate a spacer/adapter for the gixxer rotor, that is, if the rotors are the same size. I doubt that they are. I hear of some builders using mx hubs. Sounds like an interesting project. Good luck with it.
ok i purchase this yesterday for the swaps the gsxr 2003 brake and thinking in using the scouter front lights . i only need the harley narrow glade well .
ok i purchase this yesterday for the swaps the gsxr 2003 brake and thinking in using the scouter front lights . i only need the harley narrow glade well .
You not going to use the kz wheels? That's cool because I had a really hard time finding kz wheels in good condition. That is why mine are powder coated in that textured paint, to hide the pits.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
