dwmccudden
New Member
So I swapped my turn signal assemblies to LED units on my 75 CB550. It took me a while to find the cause of all of the flashing being the turn indicator, now disconnected. I also installed a Sparck flasher relay. I can't seem to get the turn signals to flash unless I put a larger load on corresponding turn signals circuit. And to make things more confusing to me, the turn signals will function if I move the kill switch to off. I don't really understand why that is since that's a different circuit. I bought the Sparck relay so I didn't have to install resistors, do I still need to anyways?