Leftovers..

[Slick_Cycles]

1.
Cognito Moto top triple clamp, fits 75-78 CB750f, 77-78 CB750k, 81-82 CB750k, and 77-78 CB750A.
Drilled for the riser clamps that hold the Motoscope mini gauge.
Brand new, never mounted.
$100 plus the ride

2. 35mm style Tommaselli style clip-ons.
Chrome still decent.
All the hardware there, no cracks.
$50 plus the ride.

3. Adjustable MX style pegs
Clevis mount thats adjustable, will mount up to almost any application
Full adjustable, never mounted
$50 plus the ride

4. I’ve got a couple sets of R6 triple trees.
These are the pre-inverted ones, good upgrade to most vintage bikes, while keeping that telescopic fork look. R6 are fully adjustable, very good upgrade if you’re building any sort of tracker.
$50 plus the ride

5. Mini gauges, I have so many of these things. Chrome ones, black ones, both speedo and tachs. In MPH and KMPH
Most $25 plus the ride
If you’re looking for something a bit fancier I’ve got a couple drag specialties ones too

Not pictured:

1. Honda GB400tt. CDI BOX, tested on bike, works flawlessly. Had it in my toolbox for years, I know these bikes are impossible to get parts for, who knows someone you know might need one.
$200 plus the ride

2. SR500/XS650 forks, someone somewhere along the line put air valving caps on them, haven’t cracked them open to see if there’s any further upgrades.
$50 plus the ride

3. XS650 swing arm that has been braced, competent job, done well, came off a customers bike, than we put an aluminum swingarm on
Slight chain rub from incorrect chain tension on the bracing
$50 plus the ride

Located in Canada, so be aware shipping might be a tad steep on some of the bigger things, but I’ll work with you as much as possible