Machinist needed to make stub axle for sidecar swingarm

johngofast

johngofast

Over 1,000 Posts
Need a machinist to make a stub axle for the sidecar swing arm, like this one, but for a 25mm bearing instead of 20mm.. I can send all measurements when the right person contacts me. The grooves for the bolts aren't super necessary, I can cut those after if I need to.





Thanks!
 
Hiya, yeah I can do Shoot me the particulars: Homagemotoworks@gmail.com
Thanks!
 


Here's the measurements, I have a couple questions. I plan to use a 25mm ID bearing, should the axle shaft be made just shy (maybe 24.85) of 25mm? Also, what would you suggest for the threads as far as pitch? I'll have to find a crown nut that will match whatever you cut the threads to.

Thanks for your help on this, I really appreciate it!
 
Sorry Mate, got slammed at work and my net is down til Saturday.
What's your timeline on this piece?
I'd look for a finer pitch thread castle nut, perhaps something already present elsewhere on the bikeLemme know what you pick and I can take care of the rest here. A for your bearing, send me a part number and I can calculate from there.
 
Great hearing from you Sir, and no problem, I'd like to have it in the next month if possible, I'm honestly not finding much in the 25mm range for castle nuts, so I'll go with a 20mm x 1.5, like so:

http://www.ebay.com/itm/NEW-2007-2010-Honda-TRX420-20mm-REAR-AXLE-Nut-TRX-420-Rancher-/221245668714?pt=Motors_ATV_Parts_Accessories&hash=item338344fd6a&vxp=mtr#ht_2625wt_1209

The bearings will be# 30205, 25ID x 47OD x 15W.

Send me a PM or email and let me know what you'll want for this and yeah, it's not a big rush, I just want to know that I have someone that can do it.

Thank you!
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom