racing geek
Just a kid with a welder
MAKE OFFERS! I want this stuff gone so I can finish my CL360 build and move on to my XS650 project. I ship as much as I safely can in USPS flat rate boxes so the shipping cost will be added when I know what exactly you want.
$25 XS650 OEM seat cover in good shape
$20 XS650 front rotor
-- 6x80mm bolt pattern
-- 298mm OD
-- 7mm thick (6.5mm min thickness)
$30 CBR600 F2 front calipers
-- guide pins are not rusted solid
-- pads have some life left
-- brake lines are not cracked or damaged
$30 CBR600 F2 rotors with rotor bolts
-- 6x165mm bolt pattern
-- 276m OD
-- 4.8mm thick (4mm min thickness)
$20 Honda GL1500 rear shock
-- 3" OD spring
-- 13.25" center to center
-- 16mm diameter 1" wide upper mount
-- 14mm 0.75" lower mount
-- bushings in good shape
-- the sticker says "SHOWA MAM-003"
The following are from my CB/CL360 projects and similar vintage Honda's
-- $??? CL360 battery tray with rubber cushion
-- $10? CL360 tool box
-- $?? CL360 plastic splash guard
-- $5? CL360 rusty but undented rear fender
-- $30 CL360 stock seat in good condition other then the odd lump in the cover and the stain above the Honda lettering. Still has the owners manual cover too.
-- $15 1974 CL360 owners manual. The pages are starting to fall out but they are all there and in good shape. The damage to the cover is from sitting in the compartment under the seat for many many years.
-- $10? CL360 pair of complete air boxes and junk filters
-- $10? CB360 a pair of incomplete air boxes
-- $30 CL360 swingarm with axle and adjusters. If I remember correctly this is a direct bolt on for the CB450's and is 2" longer.
-- $25 CL360 ignition switch and key
-- $5? CL360 taillight and tail light bracket
-- $5? foot brake lever
-- $40 CB/CL360 wiring harness
-- $35 CB360 hand switchs
-- $15? CL360 front fender
-- $?? CL360 headlight bracket and turn signals with cracked lenses
-- $15? KZ440 or KZ400 front hub
MAKE OFFERS! I want this stuff gone so I can finish my CL360 build and move on to my XS650 project. I ship as much as I safely can in USPS flat rate boxes so the shipping cost will be added when I know what exactly you want.
$25 XS650 OEM seat cover in good shape
$20 XS650 front rotor
-- 6x80mm bolt pattern
-- 298mm OD
-- 7mm thick (6.5mm min thickness)
$30 CBR600 F2 front calipers
-- guide pins are not rusted solid
-- pads have some life left
-- brake lines are not cracked or damaged
$30 CBR600 F2 rotors with rotor bolts
-- 6x165mm bolt pattern
-- 276m OD
-- 4.8mm thick (4mm min thickness)
$20 Honda GL1500 rear shock
-- 3" OD spring
-- 13.25" center to center
-- 16mm diameter 1" wide upper mount
-- 14mm 0.75" lower mount
-- bushings in good shape
-- the sticker says "SHOWA MAM-003"
The following are from my CB/CL360 projects and similar vintage Honda's
-- $??? CL360 battery tray with rubber cushion
-- $10? CL360 tool box
-- $?? CL360 plastic splash guard
-- $5? CL360 rusty but undented rear fender
-- $30 CL360 stock seat in good condition other then the odd lump in the cover and the stain above the Honda lettering. Still has the owners manual cover too.
-- $15 1974 CL360 owners manual. The pages are starting to fall out but they are all there and in good shape. The damage to the cover is from sitting in the compartment under the seat for many many years.
-- $10? CL360 pair of complete air boxes and junk filters
-- $10? CB360 a pair of incomplete air boxes
-- $30 CL360 swingarm with axle and adjusters. If I remember correctly this is a direct bolt on for the CB450's and is 2" longer.
-- $25 CL360 ignition switch and key
-- $5? CL360 taillight and tail light bracket
-- $5? foot brake lever
-- $40 CB/CL360 wiring harness
-- $35 CB360 hand switchs
-- $15? CL360 front fender
-- $?? CL360 headlight bracket and turn signals with cracked lenses
-- $15? KZ440 or KZ400 front hub
MAKE OFFERS! I want this stuff gone so I can finish my CL360 build and move on to my XS650 project. I ship as much as I safely can in USPS flat rate boxes so the shipping cost will be added when I know what exactly you want.