S
smvirili
Guest
hey guys. i need a gasket for a mikuni that came along with a 70 Suzuki TC120 trailcat. I have no idea if it is stock or not. Measured all dimensions and none of them match the Mikuni VM table that is available as a pdf online. It is almost (or even more than) 10mm smaller in all suggested dimensions on the chart.
the choke plunger is the cable type, mounted on the handle bars, and not the lever directly on the carb. this is all the info i have. pics are probably useless but here it is after a little clean.
any ideas, suggestions on what it is or where to look would be great. there is unfortunately next to no info online about the TC120 series, and a repair manual from ebay with shipping from US will cost me $55 bucks!
cheers for your time
the choke plunger is the cable type, mounted on the handle bars, and not the lever directly on the carb. this is all the info i have. pics are probably useless but here it is after a little clean.
any ideas, suggestions on what it is or where to look would be great. there is unfortunately next to no info online about the TC120 series, and a repair manual from ebay with shipping from US will cost me $55 bucks!
cheers for your time