Follow along with the video below to see how to install our site as a web app on your home screen.
Note: This feature currently requires accessing the site using the built-in Safari browser.
We noticed you are blocking ads. DO THE TON only works with community supporters. Most are active members of the site with small businesses. Please consider disabling your ad blocking tool and checking out the businesses that help keep our site up and free.
Hey anyone out there have a CB360 camshaft in decent condition? I just cracked mine tightening down the points cam. So dumb. Telling myself that it mush have had a small crack in it because there is no way I righted that hard. Who knows. Aaaaaaah. Any help appreciated!
Nice thank you! I couldn’t find those. Looks like the second one is in a us warehouse. I think I’ll wait until the end of the day and see if any show up. If not I’ll order that one. Thanks again!
Ya this is embarrassing to admit but I cracked it tightening down the points cam. So stupid. In my defense it didn’t take much at all to crack. Prob a half turn over contact. Every other bolt on engine was meticulously torqued to spec and i lost my mind on this one.
Ya it just broke off today taking the points off. In better news I found one on eBay from a guy who was selling a whole engine. I messaged everyone with a full engine and he took me up on my offer. Sending it across the country tomorrow.
I've repaired one by bolting broken off piece back on. Not too much extra work as I 'gun drilled' it for oil flow and used an Allen bolt from right side. It's only an experiment and may need a small section o-ring under points cam as I don't know how well ''Loctite' will seal the 'crack'? The alternative would be to make a new extension of larger diameter with flange and screw/pin it in place but I thought I would try the easy way first
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.