Need fork tube for '74 CL360

[john.leach1991@gmail.com]

Hello everyone. This is my first post and I was hoping someone has a fork tube to replace a bent one on my 1974 Honda CL360 Scrambler. Anyone?

Someone save the day!

JL

 

[xb33bsa]

why not straighten it ?

 

[john.leach1991@gmail.com]

THAT'S POSSIBLE?!

 

[xb33bsa]

within reason, yes
how bad bent?

 

[john.leach1991@gmail.com]

Not sure. Just loosened everything and it straightened out, or seemed to anyways. The front fender is a bit tweaked, and I think that seemed to be the root of the problem, because when I loosened that, everything works out fine. Maybe I will just have to work the fender a bit to get it back to straight? At this point, this should probably go in another forum...

 

[xb33bsa]

sounds like they may have just got all twisted out of line , if you are still having issues
it is real easy to verify if bent
remove each complete leg, then clamp it down to a bench/hold in a vise, sit on it whatever the lower(slider) and slowly rotate the inner/upper stanchion tube
if bent you will be able to see it