Need some help with a small steel ball

[milehighcj360t]

Hello gents, and ladies where applicable,

So in my haste (which i know makes waste), i seem to have misplaced the small ball bearing seen in the attached photo. I was curious if anyone had a diameter on the steel ball as i've got a plethora of steel balls floating around my garage floor (thanks to the removal of 3 headsets on different bikes)...it is likely that one of those little buggers rolling around might be the one i need, but i want to make sure of the diameter before putting it to use. If you know of the size or have an extree, i'd be one happy duder.

Thanks,

H

 

[lingo]

5/16" stem bearings are 1/4"

 

[milehighcj360t]

yeah i don't need the stem bearing tho, i need the bearing for the clutch plate...in the diagram. Thanks for the speedy reply tho!

 

[JustinLonghorn]

Yep #10 sized Ball Bearing (5/16).

92 cents from bike bandit. Part number 740358

 

[DrJ]

.25" bearing is fine. Exact size is not crucial. If you don't have one, any bicycle shop will.

 

[djelliott]

8MM.

 

[Sonreir]

I have some big brass balls, but I don't need any help with those.