New Guy
- Thread starter killerx
- Start date
Grahamworks
Been Around the Block
What's up Kyle... Welcome to DTT. I'd love to follow your bike's progress into a cafe. Start a thread in the build section and take lots of pictures. We all like pictures.
-chris
-chris
MotorbikeBruno
Over 1,000 Posts
Welcome! There's a few of us from Minnesota on here. Always glad to help too. Now get to posting that project!
Bruno
Bruno
killerx
Been Around the Block
That will be a while, managed to punch a #6 drill through my rt index finger at work last week.
The bike has been sitting for 3yrs. After my stepson got done learning to ride on it I went to start it and found it seized up. Bought a K1 for parts( no tank, rotten seat, but only showing 8k on the odo). Motor seems good, cleaned the points, hooked up a battery, squirted some gas in the carbs and it fired up. Gonna put it in the K5 and get every working then go nuts on it.
The bike has been sitting for 3yrs. After my stepson got done learning to ride on it I went to start it and found it seized up. Bought a K1 for parts( no tank, rotten seat, but only showing 8k on the odo). Motor seems good, cleaned the points, hooked up a battery, squirted some gas in the carbs and it fired up. Gonna put it in the K5 and get every working then go nuts on it.
MotorbikeBruno
Over 1,000 Posts
Yikes...that probably didn't feel all that great huh? 
Well, when you get around to it, post up! ....ok i'll shush now :-X
Well, when you get around to it, post up! ....ok i'll shush now :-X
