Nibs in Enamel

Mr Biggz

New Member
Any tips or advice to remove the dust specks I unfortunately encountered in this rattle can job I just finished?

Paint: Duplicolor Fleet coat gloss back enamel

Material: cast iron
C4278C5F-22DA-404C-909E-DE14F31AEB74.jpeg
E1B105C2-3EFA-4082-817D-353F1712A10B.jpeg
 

Attachments

  • 33C7D061-52D8-4AF9-B9CF-DA5B810E5DB5.jpeg
    33C7D061-52D8-4AF9-B9CF-DA5B810E5DB5.jpeg
    397.6 KB · Views: 44

SONICJK

Reminds me of...me No, I'm sure of it. I hate him
Wetsand and buff is about your only option.
You coudld try a clay bar first and hope for the best.
 

Maritime

Over 10,000 Posts
Wetsand like above but if you need to re-coat make sure you wait the time on the can or you'll get even worse issues.
 

DTT Bike Of The Month Gallery

DTT Light or Dark

www.jadusmotorcycleparts.com
shop.themotoworks.com
www.cognitomoto.com
https://www.townmoto.com
www.speedmotoco.com
www.lostapostle.ca/
www.sparckmoto.com
Top Bottom