Parting Out 1976 CB750K plus tons of New OEM parts SF Bay Area

halekai

Active Member
Hello DTT,

UPDATE...Now parting her out. Let me know what you need. I will ship.

Complete list of detailed pictures at this flickr page. I will update each picture by deleting it or adding what is sold to the caption...

https://www.flickr.com/photos/oldhondaparts/

I have a 76 CB750 project that I was going to tackle and document here but I just got a new job that starts in a couple of weeks and I do not want this bike sitting around unbuilt and neglected.

There is no title on the frame but I did run the numbers with my CHP buddy through insurance database as well as CHP and DMV and she is clean.

Besides being a nearly complete project (no seat and a few other small bits) I also have a box of Genuine Honda Parts to replace all the rubber and plastic parts on the bike plus other bits...in all the box contains about $1000+ in parts. here is a list of most of it...

45126-341-003 upper brake line and boot
45125-300-003 lower brake line
91302-377-000 o ring
45530-377-305 M. cyl kit
41242-300-020 brake dapeners x 4
4241-300-040 Brake dampeners x 4
95012-17001 battery strap
17247-303-000 side cover grommet x 2
83551-300-000 gromet x 4 Wire routing?
45451-317-690 cable fender gromet
16212-300-030 carb boots x 4 (I have several used sets as well with clamps)
17613-292-000 tank rubber frame mount at seat
45521-mJ6-006 seal
17534-323-300 seal
45520- 300-000 Diaphragm
61102-300-000 fender strut mount plastic bushing x 1
45110-300-003 bleeder screw cap
91206-286-013 shift shaft oil seal
brake lever
clutch lever
fork gators x 2
Two sets of front spokes and two sets of rear spokes
coil/plug wires x 6
45128-341-670 Hard brake line (from caliper to lower flex line)
23801-300-620 front sprocket
91205-300-005 Drive shaft oil seal
91302-377-000 o ring x 2
45109-300-003 brake bleeder screw
17611-283-010 tank front rubber bumpers
17631-253-010 gasket
OEM grips and throttle tube...and some other items I am forgetting.

If you bought these new it would ad up to over $1000 I will take $500 for this box

also a complete Cycle-X gasket kit with oil seals. Someone told me they are hard to get these days???

Here is the CL ad link please consult that ad for updates as to what has been sold and what is still available...

http://sfbay.craigslist.org/eby/mcy/4380050640.html

In addition there are two sets of carbs, new tires and tubes, two each front and rear spoke sets, Clubmans, OEM brake lines, Dyna coils and Dyna ignition, near perfect chrome front fender, really really good chrome front forks, clutch and brake lever, OEM new front and rear sprockets...etc.

Some things I know the price and other things I dont so shoot me some offers and let me know if you need pictures or descriptions of anything.

You can email me at

actualsurfer@yahoo.com

Hale
 

Attachments

  • 3.jpg
    3.jpg
    323.1 KB · Views: 156
  • 7.jpg
    7.jpg
    78.1 KB · Views: 329
No longer selling as project. Parting her out. Let me know what you need. Motor is already blown apart down to the cases so any bit no matter how small.

H
 
Back
Top Bottom