If you saw my post in introductions, you will see I am new to the forum and the "cafe" world.. with that being said, my first project is the suspension.... which is in terrible, terrible shape... I have done some re-search and i was thinking of snagging up new Progressive springs for the front and rear.. Im not looking for a super aggressive ride, just something a little bit better than the OEM suspension..
Its a 1977 Honda CB750F, I have found some progressive springs through Cycle X that appear to be a good choice... with that being said, ive tried to find a write up, or thread on the installation of springs with no luck.. Is this an easy to moderate install that I could do? special tools? Im very mechanically inclined and was hoping I could do the work myself, any advice, info or direction is much appreciated! Also, does anyone know the exact amount of oil in each fork the OEM Forks require?
Its a 1977 Honda CB750F, I have found some progressive springs through Cycle X that appear to be a good choice... with that being said, ive tried to find a write up, or thread on the installation of springs with no luck.. Is this an easy to moderate install that I could do? special tools? Im very mechanically inclined and was hoping I could do the work myself, any advice, info or direction is much appreciated! Also, does anyone know the exact amount of oil in each fork the OEM Forks require?