Project cb360(Lucky 7even) A video finally!

cafePete

cafePete

Coast to Coast
DTT BOTM WINNER
Hello everyone,
Wrap up my cb360 this past weekend, after a few hours of testing and tuning of the carbs and
man she's running great. Woke up nice and early this morning, grabed my gear a rag
a screw driver and went on a 30mile run, smiling all the way. ;D
Thanks to all DTT members for the help and inspiration that went in to my build.
Heres a few pics I snapped on todays run.
Thanks for looking ;D
Peter

360-7.jpg


360-6.jpg


360-4.jpg


360-3.jpg


360-5.jpg


360-8.jpg
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

Excellent. I love your build. So clean and a great color combo.
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

bike looks great man!
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

Thanks for the words guys!
Peter
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

Great build and nice pics too! The colour combo is great forsure, and the tailight set-up looks tight.

Where are you in ONT?
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

gribbs said:
Great build and nice pics too! The colour combo is great forsure, and the tailight set-up looks tight.

Where are you in ONT?
Click to expand...

Thanks gribbs! I'm in Cambridge, a hour west of Toronto.
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

she looks great but somethign is up with the striping on your tank. is it just pixely if you look at them they seem to change per picture bud? it almost looks like it was done in microsoft paint... those lines are too sharp to be over run from tape...what is going on there?
360-4.jpg


360-8.jpg
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

Beautiful! I too noticed the pixelation, thought it was my screen. Sick bike though, love the colors and the exaust.
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

That is one great looking Honda.
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

JRK5892 said:
she looks great but somethign is up with the striping on your tank. is it just pixely if you look at them they seem to change per picture bud? it almost looks like it was done in microsoft paint... those lines are too sharp to be over run from tape...what is going on there?
360-4.jpg


360-8.jpg
Click to expand...

Microsoft paint that hurts! :'(
I put alot of hard work into this build to lie to myself, and all the members of DTT. I guarantee theres no microsoft paint or photoshop done
to these photos. I picked up some vinyl from the local sign shop $20 did alittle bit of tracing and cutting and came up with these decals.
Also the image has been reduced from the original(large files raw).
Thanks everyone for all the great compliments I'm glad you all like the outcome as much as I do.
Here's a original image.
DSC_0389.jpg

Vinyl and tools
decal.jpg
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

The bike looks amazing, I especially love the gaters and the color combo.

I get it, it's vinyl, and impressively cut using scissors. You gotta get yourself an exacto knife and some fine line tape for layout. :)
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

mysta2 said:
The bike looks amazing, I especially love the gaters and the color combo.

I get it, it's vinyl, and impressively cut using scissors. You gotta get yourself an exacto knife and some fine line tape for layout. :)
Click to expand...

Thanks man!
Had a bit of practice cutting decal for my R6, never got
good with the exacto knife.lol
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

man i was in no way shape or form calling you out! i was asking it it was pixely...
to help you cut strait lines get a framing square, the long metal ones... on the under side of mine i put a few rubber bump pads to hold the decal in place. then press your razor against the edge and you will have a strait cut every time! i love the paint man! for circles i use cans, or anything metal i can find... problem wiht plastic is the razor will bite... to get the curves and flow... now that is just practice... ride the piss out of that thing!
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

JRK5892 said:
man i was in no way shape or form calling you out! i was asking it it was pixely...
to help you cut strait lines get a framing square, the long metal ones... on the under side of mine i put a few rubber bump pads to hold the decal in place. then press your razor against the edge and you will have a strait cut every time! i love the paint man! for circles i use cans, or anything metal i can find... problem wiht plastic is the razor will bite... to get the curves and flow... now that is just practice... ride the piss out of that thing!
Click to expand...

Sorry I came back alittle harsh.
I too use cans to shape circles, but the rubber bump pads to hold the vinyl,
now that's a great tip!
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

HELL YA!!!!! looks great! thanks for the props to the site man... congrads!!!!
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

Thanks guys! Very happy to be featured on pipeburn. ;D
Love that site!
DTT is where all the craziness started, endless amount
of info and help.
Peter
 
Re: Project cb360(Lucky 7even) Complete for now! June 07/10

Your bike looks amazing, I hope you don't mind but I had to take an idea from you and do the rear fender thing as well.
Its a bad photo...


Uploaded with ImageShack.us

Once again awesome bike!
-Ty
 
You must log in or register to reply here.

DTT Light or Dark

  • DTT Light
    • www.jadusmotorcycleparts.com
    www.lostapostle.ca/
    www.sparckmoto.com

    Spread the Love

    Back
    Top Bottom