RD250/350 - Where do these cables go?

JiveTalkinRobot

Been Around the Block
Hi,

So I was cleaning my RD and noticed that these cables don't attach anywhere. Is this how it is supposed to be? They are the neon cables that are coming out of the carbs. I apologize for my continued noobiness, but I did scour the service manual and did a search before I decided to post in the forum.

Thanks!


RDcarbcables.jpg
 
Yup. There should be four lines, two for each carb. One line will be from at the bottom of the bowl for drain, and one will be from the carb body which is for vent/overflow. And +1 for Capitans routing suggestion. If you trace an imaginary line from the kicker shaft towards the primary sprocket, you should find a clip/clamp bolted to the case to hold the tubes in place.
 
Back
Top Bottom