Rearsets on eBay

[ejc2g]

Anybody every use these? http://cgi.ebay.com/ebaymotors/Universal-Rearsets-Suzuki-Gsxr-Honda-Cbr-CB-Yamaha-/140597041256?pt=UK_Motorcycle_Parts&hash=item20bc3c9868#ht_2315wt_941


Price doesn't seem bad, looking at purchasing a set for my CB750F and fabricating some sort of bracket.

 

[cafematty]

If you want nice new ones get in touch with Kevin from Loaded Gun Customs - I've seen his in person and they're top notch.

+1

 

[Tim]

Oog my posts are getting messed up. Typing on my phone still on way home from Alabama. Putting it down now before I de le te the site

 

[seven54]

Those levers look a little too thin. You get what you pay for....

 

[ejc2g]

I looked briefly at the Loaded Guns. Do they make brackets for the CB750F?

 

[surffly]

what year F?
the 75-76 only really have one bolt on option and its $300
the 77-78 only have custom made options

if you have the fab skills look for some R6/R1 rearsets that have the arms mounted to the pegs so you dont have to worry about the "modern" bracket.

 

[ejc2g]

It's a 78. I seem to have problems finding a decent set that doesn't cost $400+

 

[ejc2g]

what year F?
the 75-76 only really have one bolt on option and its $300
the 77-78 only have custom made options

if you have the fab skills look for some R6/R1 rearsets that have the arms mounted to the pegs so you dont have to worry about the "modern" bracket.

What do you mean by the modern bracket?

 

[OpTiCz]

I would just some used gsxr sets since it includes the rear master cylinder. That's what I did

Sent from my HTC Glacier using Tapatalk

 

[surffly]

What do you mean by the modern bracket?

The "V" mount and guard that the modern bikes have.
On alot of bikes the passenger mounts are a good place to put the rearsets.....but on the 78 its harder....alot harder....
since the master and such are behind those large plates its hard to fab something that works.
honestly they are big and heavy bikes at the end of the line....maybe you might want to think about stock pegs and superbike bars.

 

[ejc2g]

I definitely want to run clip-ons, so I guess I'll have to figure something out.

 

[Spoonz]

if you have the fab skills look for some R6/R1 rearsets that have the arms mounted to the pegs so you dont have to worry about the "modern" bracket.

Used this setup on my RD250 when I put rear disc on it just had to fab up some mounting plates to bolt to.